Institute

Vorträge und Artikel

Lectures and Articles

Kontakt

Contact

Dinesh Thirunavukkarasu M.Sc.
+49 241 80 25699
Email

Potentials of low-carbon aluminium products in automotive applications

European Aluminium Congress 2019, 25. + 26. November 2019, Düsseldorf
Dipl.-Ing. Kristian Seidel, fka GmbH
Dinesh Thirunavukkarasu M.Sc., Institut für Kraftfahrzeuge (ika) - RWTH Aachen University
Stig Tjøtta, Norsk Hydro ASA

Low-Carbon Aluminium Products – Potentials in Automotive Applications from a Full Life Cycle Perspective

Fahrzeuge von morgen 2019, 19. + 20. November 2019, Frankfurt am Main
Dipl.-Ing. Leif Hagebeuker, Norsk Hydro ASA
Dinesh Thirunavukkarasu M.Sc., Institut für Kraftfahrzeuge (ika) - RWTH Aachen University

The full vehicle assessment model within the ALLIANCE project

Future of Automotive Lightweighting Day, 19. September 2019, Aachen
Dinesh Thirunavukkarasu M.Sc., Institut für Kraftfahrzeuge (ika) - RWTH Aachen University

Agile und interdisziplinäre Entwicklungsansätze für Fahrzeuge von morgen

Aachener Karosserietage 2019, 17. + 18. September, Aachen
Univ.-Prof. Dr.-Ing. Lutz Eckstein, Institut für Kraftfahrzeuge (ika) - RWTH Aachen University
Dinesh Thirunavukkarasu M.Sc., Institut für Kraftfahrzeuge (ika) - RWTH Aachen University
Dipl.-Ing. Kristian Seidel, fka GmbH

Lightweight design solutions in the automotive sector: Impact analysis for a door structure

KES-SDM-2019, 04.07.2019, Budapest
Massimo Delogu, Francesco Del Pero, Università degli Studi di Firenze
Marcos Ierides, Violeta Fernandez, Bax Innovation Consulting
Kristian Seidel, fka GmbH
Dinesh Thirunavukkarasu, Institut für Kraftfahrzeuge (ika) - RWTH Aachen University

Sustainable and cost efficient lightweight design by the use of innovative material and manufacturing technologies

Automotive Engineering Expo Congress 2019, 04.06.2019, Nuremberg
David Joglar, Toyota Motor Europe (TME)
Dinesh Thirunavukkarasu, Institut für Kraftfahrzeuge (ika) - RWTH Aachen University

Potenziale für semistrukturelle Serienbauteile aus Epoxid-SMC

lightweight.design 1/2019, Springer Fachmedien Wiesbaden GmbH
Dr.-Ing. Leif Ickert, Vestaro GmbH
Jan Bochinger M.Sc., Vestaro GmbH
Sebastian de Nardo M.Sc., Evonik Resource Efficiency GmbH
Dinesh Thirunavukkarasu M.Sc., Institut für Kraftfahrzeuge (ika) - RWTH Aachen University

Development of a full vehicle assessment model to evaluate the impact of lightweight technologies from an environmental and economical perspective

ALLIANCE Future Lightweighting Day 2018, Aachen 20.09.2018
Dinesh Thirunavukkarasu M.Sc., Institut für Kraftfahrzeuge (ika) - RWTH Aachen University

Economical and ecological assessment methodology for lightweight technologies in car bodies

WKM-Symposium 2018, 04.07.2018, Darmstadt
Dinesh Thirunavukkarasu M.Sc. (ika)

Lightweight Automobiles ALLIANCE Project: First Results of Environmental and Economic Assessment from a Life-Cycle Perspective

SAE International, SAE Torino Group, 30.5.2018
Massimo Delogu, Francesco Del Pero and Laura Zanchi, Università degli Studi di Firenze
Marcos Ierides and Violeta Fernandez, Bax Innovation Consulting
Kristian Seidel, fka mbH
Dinesh Thirunavukkarasu, Institut für Kraftfahrzeuge (ika) - RWTH Aachen University
Thilo Bein, Fraunhofer LBF

Influence of Automated Driving on Future Vehicle Body Concepts

Aachen Body Engineering Days 2016, 20. + 21. September, Aachen
Univ.-Prof. Dr.-Ing. Lutz Eckstein, (ika)
Dinesh Thirunavukkarasu M.Sc. (ika)
Dipl.-Ing. Michael Funcke (fka)

Address

Institute for Automotive Engineering (ika)
RWTH Aachen University

Steinbachstraße 7
52074 Aachen · Germany

This email address is being protected from spambots. You need JavaScript enabled to view it.
+49 241 80 25600
+49 241 80 22147

Copyright © 2019 Institute for Automotive Engineering | Certified according to ISO 9001:2015