Presentations and articles

Ride Comfort Enhancement using Deep Reinforcement LearningTuesday, October 06, 2020

29. Aachener Kolloquium Sustainable Mobility, Aachen 05. – 07.10.2020
Guru Bhargava Khandavalli, Institute for Automotive Engineering (ika), RWTH Aachen University
Prof. Dr. Lutz Eckstein, Institute for Automotive Engineering (ika), RWTH Aachen University

The rounD Dataset: A Drone Dataset of Road User Trajectories atRoundabouts in GermanyWednesday, September 23, 2020

IEEE ITSC 2020, Rhodos, Griechenland, 20.09.2020 - 23.09.2020
Robert Krajewski, Institut für Kraftfahrzeuge (ika)
Tobias Moers, fka GmbH
Julian Bock, fka GmbH
Lennart Vater, Institut für Kraftfahrzeuge (ika)
Lutz Eckstein, Institut für Kraftfahrzeuge (ika)

Concept Development for a Functionally Integrated Lightweight Battery Housing with Special Consideration of the Joining TechnologyWednesday, September 16, 2020

Aachen Body Engineering Days 2020, Aachen, 15.+16.09.2020
Christopher Krüger, M.Sc., Institut für Kraftfahrzeuge (ika) RWTH Aachen University
Tobias Schmolke, M.Sc., Laboratory for material and joining technology (LWF) Paderborn University
Dipl.-Ing. David Merdivan, Institut für Kraftfahrzeuge (ika) RWTH Aachen University
Sebastian Spohr, M.Sc., Institut für Kraftfahrzeuge (ika) RWTH Aachen University
Prof. Dr.-Ing. Peter Urban, Institut für Kraftfahrzeuge (ika) RWTH Aachen University
Prof. Dr.-Ing. Gerson Meschut, Laboratory for material and joining technology (LWF) Paderborn University

Occupant Safety in Highly Automated Vehicles - Challenges of Rotating Seats in Future Crash ScenariosTuesday, September 08, 2020

International Research Council on Biomechanics of Injury (IRCOBI) 2020, 08. – 10.09.2020, München
Julian Becker M.Eng., Institut für Kraftfahrzeuge (ika) - RWTH Aachen University
Dr.-Ing. Gian Antonio D'Addetta, Robert Bosch GmbH
Maja Wolkenstein, Robert Bosch GmbH
Freerk Bosma, Siemens Industry Software and Services B.V.
Ruud Verhoeve, Siemens Industry Software and Services B.V.
Dr.-Ing. Michael Sprenger, ZF Friedrichshafen AG
Dr.-Ing. Swen Schaub, ZF Friedrichshafen AG
Dr.-Ing. Michael Hamacher, fka GmbH

Neural-Networks-Based Modeling of Automotive Perception Errors Using Drones as Reference SensorsTuesday, June 23, 2020

Intelligent Vehicles Symposium 2020, Las Vegas, USA, 23.06.2020 - 26.06.2020
Robert Krajewski, Institut für Kraftfahrzeuge (ika)
Michael Hoss, Institut für Kraftfahrzeuge (ika)
Adrian Meister,
Fabian Thomsen, Institut für Kraftfahrzeuge (ika)
Julian Bock,
Lutz EcksteinInstitut für Kraftfahrzeuge (ika)

HMI Concept for Safe Driving Mode TransitionsWednesday, March 25, 2020

ATZ worldwide 122 (2020) 4, S. 26–31
Depner, Nico, fka
Bavendiek, Jan, ika
Knöß, Stefan, ZF
Uhlig, Markus, Faurecia

Potentials of low-carbon aluminium products in automotive applicationsTuesday, November 26, 2019

European Aluminium Congress 2019, 25. + 26. November 2019, Düsseldorf
Dipl.-Ing. Kristian Seidel, fka GmbH
Dinesh Thirunavukkarasu M.Sc., Institut für Kraftfahrzeuge (ika) - RWTH Aachen University
Stig Tjøtta, Norsk Hydro ASA

Low-Carbon Aluminium Products – Potentials in Automotive Applications from a Full Life Cycle PerspectiveWednesday, November 20, 2019

Fahrzeuge von morgen 2019, 19. + 20. November 2019, Frankfurt am Main
Dipl.-Ing. Leif Hagebeuker, Norsk Hydro ASA
Dinesh Thirunavukkarasu M.Sc., Institut für Kraftfahrzeuge (ika) - RWTH Aachen University

Von der Prozess- zur Struktursimulation laserstrahlgeschweißter ultrahochfester StähleThursday, November 07, 2019

Simulationsforum Schweißen und Wärmebehandlung 2019, Weimar, 05. – 07.11.2019
Daniel Ruf M.Sc., Institut für Kraftfahrzeuge (ika) - RWTH Aachen University
Fatma Akyel M.Sc., Institut für Schweißtechnik und Fügetechnik (ISF) - RWTH Aachen University

The full vehicle assessment model within the ALLIANCE projectThursday, September 19, 2019

Future of Automotive Lightweighting Day, 19. September 2019, Aachen
Dinesh Thirunavukkarasu M.Sc., Institut für Kraftfahrzeuge (ika) - RWTH Aachen University

The light weighting impact of the ALLIANCE projectThursday, September 19, 2019

Future of Automotive Lightweighting Day, 19. September 2019, Aachen
Sebastian Spohr M.Sc., Institut für Kraftfahrzeuge (ika) - RWTH Aachen University

Agile und interdisziplinäre Entwicklungsansätze für Fahrzeuge von morgenTuesday, September 17, 2019

Aachener Karosserietage 2019, 17. + 18. September, Aachen
Univ.-Prof. Dr.-Ing. Lutz Eckstein, Institut für Kraftfahrzeuge (ika) - RWTH Aachen University
Dinesh Thirunavukkarasu M.Sc., Institut für Kraftfahrzeuge (ika) - RWTH Aachen University
Dipl.-Ing. Kristian Seidel, fka GmbH

Challenges in Automotive HMI-Development – The Need for new Methodological ApproachesMonday, September 09, 2019

28th Aachen Colloquium Automobile and Engine Technology, Aachen, 2019
Bavendiek, J., ika
Eckstein, L., ika
Olschewski, I., fka

Validation of Predictive Vehicle Operating Strategies with an Environment-in-the-Loop ApproachWednesday, July 17, 2019

WKM-Symposium 2019, Karlsruhe, 17.07.2019
Yiqun Xia (ika)
Lutz Eckstein (ika)

Lightweight design solutions in the automotive sector: Impact analysis for a door structureThursday, July 04, 2019

KES-SDM-2019, 04.07.2019, Budapest
Massimo Delogu, Francesco Del Pero, Università degli Studi di Firenze
Marcos Ierides, Violeta Fernandez, Bax Innovation Consulting
Kristian Seidel, fka GmbH
Dinesh Thirunavukkarasu, Institut für Kraftfahrzeuge (ika) - RWTH Aachen University

Potentials of Modern Active Suspension Control Strategies - From Model Predictive Control to Deep Learning ApproachesWednesday, June 26, 2019

10. ChassisTechPlus 2019, München 25. – 26.06.2019
Guru Bhargava Khandavalli, Institute for Automotive Engineering (ika), RWTH Aachen University
Dr.-Ing. Marcus Kalabis, Ford Werke GmbH
Daniel Wegener, fka GmbH
Prof. Dr. Lutz Eckstein, Institute for Automotive Engineering (ika), RWTH Aachen University

Sustainable and cost efficient lightweight design by the use of innovative material and manufacturing technologiesTuesday, June 04, 2019

Automotive Engineering Expo Congress 2019, 04.06.2019, Nuremberg
David Joglar, Toyota Motor Europe (TME)
Dinesh Thirunavukkarasu, Institut für Kraftfahrzeuge (ika) - RWTH Aachen University

Potenzieller gesellschaftlicher Nutzen durch zunehmende FahrzeugautomatisierungFriday, April 12, 2019

Berichte der Bundesanstalt für Straßenwesen, BASt-Bericht F 128
Christian Rösener, Institut für Kraftfahrzeuge (ika)
Jan Sauerbier, Institut für Kraftfahrzeuge (ika)
Adrian Zlocki, Institut für Kraftfahrzeuge (ika)
Lutz Eckstein, Institut für Kraftfahrzeuge (ika)
Friederike Hennecke, Institut für Straßenwesen (isac)
Dirk Kemper, Institut für Straßenwesen (isac)
Markus Oeser, Institut für Straßenwesen (isac)

Auslegung und Validierung funktionsintegrierter Interieurbauteile zur energieeffizienten FahrzeugbeheizungWednesday, April 03, 2019

PIAE – Plastics in Automotive Engineering, Mannheim, 03. – 04.04.2019
Marten Trenktrog, M.Sc., Institut für Kraftfahrzeuge (ika)
Christoph Massonet, M.Sc., Institut für Kraftfahrzeuge (ika)
Damian Backes, M.Sc., Institut für Kraftfahrzeuge (ika)
Dipl.-Ing. Jan Ludwig, Institut für Kraftfahrzeuge (ika)

Potenziale für semistrukturelle Serienbauteile aus Epoxid-SMCFriday, March 01, 2019

lightweight.design 1/2019, Springer Fachmedien Wiesbaden GmbH
Dr.-Ing. Leif Ickert, Vestaro GmbH
Jan Bochinger M.Sc., Vestaro GmbH
Sebastian de Nardo M.Sc., Evonik Resource Efficiency GmbH
Dinesh Thirunavukkarasu M.Sc., Institut für Kraftfahrzeuge (ika) - RWTH Aachen University

Page 2 von 24